News

Importance of lubricating oil in forced concrete mixer

November 11, 2019

In summer, the temperature of concrete mixer is often too high, especially the high-power forced mixer. The most direct external cause of the high temperature of mixer reducer in summer, especially in the special working environment of concrete mixing plant, the temperature rise of equipment is more obvious.

Generally, the forced concrete mixer will have system alarm prompt when the temperature is overheated. If the mixer works continuously and for a long time, we must control the system at any time. Once the system alarm temperature is overheated, we must immediately stop the machine for inspection.

concrete batching plant

Sometimes the reason for the high temperature of the mixer is caused by the viscosity of the lubricating oil. If the viscosity of the lubricating oil is too high, the fluidity will be correspondingly poor, resulting in the increase of the operating load of the mixing bearing, and then the increase of the friction, and the temperature will increase with the friction speed. However, if the viscosity of the lubricating oil is low, the lubricating effect will become poor, so the friction of the mixer parts will increase when they are running. The work of the reducer is to overcome the friction. If the friction is too large, the temperature of the reducer will naturally rise, which requires that the lubricating oil should be replaced in time, and the lubricating oil should be selected with appropriate viscosity, too high and too low will occur. The problem of temperature rise.

In addition to the problem of lubricating oil, the forced concrete mixer may also cause high temperature due to unbalanced installation, low voltage and unstable voltage, as well as small separation clearance of motor brake, which must be paid attention to. Only knowing the reasons can solve the problem. Therefore, in the work, the staff are very careful.


TAG:   Concrete mixing plant manufacturer Concrete mixing plant business  Concrete mixer plant machine
info@yczggroup.com
+86 371 5627 8155
+ 86 176 3710 0666
zhanglu624