Method for selecting a base for concrete batching plants
September 08, 2021
There are many details to consider when installing a concrete batching plant . For example, choosing a foundation is the main focus of work before building a plant. Today, Zhengzhou YCZG tells you in detail.
First, the base level of the batching plants must be checked with a level gauge and a hyperplane.
In accordance with the requirements of the drawing BSU for the preparation of pre-laid iron. The size of the embedded hardware should not be arbitrarily changed. If you need to change to inform the technical staff, please provide written proof It is required that the steel mesh is laid in the foundation of the mixing plant. The steel bar anchor should not be below the required dimension in the drawings. The depth and width of the excavation required by the foundation should not be less than the dimensions required in the drawings. Drawings should not be arbitrarily resized to mark if any changes are to be notified to the local technical management for written evidence.
Second, according to the specifications of concrete batching plants
According to the specifications of concrete batching plants, place the line, find a good reference point, the error size between the two bases should not exceed 50mm, lime poured out from the center of the base and the size of the excavation size range. After the foundation has been mined by qualified casting concrete, the secondary casting must be secondary casting. When digging a foundation, reserve the position of the foundation centerline with steel beams or debris and clearly mark the requirements. The two built-in center lines of the iron of the same foundation must be aligned with a deviation of no more than 20 mm. The pre-stacking of iron before placement should be above ground level and adjacent to the level of embedded iron, parallel and non-twisted, off-center phenomenon.
For more information about concrete batching plant, please contact us.
TAG:   concrete batching plants installing a concrete batching plant